Igneus Life Science

Lyoph-Pride SCM series provide satisfaction for specific customer’s needs. SCM series are designed upon various user requirements complying with BGMP and cGMP. From small scale to large scale, SCM series perform ultimate completion of freeze drying with uniformity and efficiency.

Verified in-house technology of Cleaning in place and Sterilization in place guarantees perfect execution and SCADA control provides precision of standard control complying with 21 CFR11.Being a great partner of your successful future, authentic full-automated loading /unloading system of ILSHIN BIOBASE shall improve your productivity.

Industrial scale freeze dryer for Bio/Food application. Equipped with high quality stainless interior/exterior, automatic process program with various recipes, powerful refrigeration system and low energy consumption, Bio/Food plant type lyophilizer is optimal solution for your application on probiotics, extract mixture, functional food and long term storage adaptation.

Our Pilot scale freeze dryer series (LP10 – LP20 – LP30 models) is the optimal solution for scale up operation prior to industrial scale production. With various application and assessment of efficiency, the ilShin Biobase pilot scale Freeze-dryers helps users to find desirable conditions and parameters for perfect drying result.

Process Control
1. Freeze Drying Process
Loading → Primary Freezing → 1st Drying Process → 2nd Drying
Sublimation process
2. Manual Control
Make input of condition and parameter for the process from Freeze
to 1st/2nd Drying Process. Process is finished after checking completion
of drying.
3. Automatic Control
Select recipe. Parameters of Pre-Freeze ~1st/2nd Drying process are
automatically setup. Process is completed by P-rise test system
inside of chamber after whole process is finished.

Drying Chamber
1. Cooling speed: within 60 minutes from 20??? to -40???(1???/min)
2. Shelf temperature uniformity: less than ±1.5???
3. Vessel pressure standard: Qualified chamber under vacuum gauge
pressure lower than 5 x10-3 Torr

Cold Trap Chamber; Condenser
1. Cooling speed: within 30 minutes from 20??? to -70???
2. Defrosting System
Hot gas solenoid method. Fast defrosting by steam and hot water.
Removing ice less than 30 minutes.

 

Vacuum System
– Pull down time: Within 45 minutes from 760Torr to 100mTorr.
Lower than 20mTorr eventually.

 

• All in one type, available at small space
• Pilot scale condenser capacity: 10~30 liters/batch
• 0.6 ~ 2.0??? various shelf area and distance (standard: 60mm)
• Selectable shelf application (Bulk or Vial stoppering)
• Shelf temperature range (-45??? to +80???)
• Selectable condenser temperature (-80???/-120???)

 

IoT remote monitoring service
Internet of things technology. 24/7 monitoring service by manufacturer’s
server as well as user’s smart phone. Real time diagnosis
and data keeping.

High speed centrifuge provides concentration under vacuum at limited space. Fast and efficient drying process is guaranteed by heating device as standard feature.

• Fast drying by radiant heat
• High-speed Concentrator

• Concentrator generates vacuum condition inside of tube and radiant heat from heating device enables fast and efficient freeze drying process.

• Fast & Easy
• Defrosting system

• Condensed ice must be removed within 30 minutes for continuous operation and for preventing contamination.
  Condenser foams round type ice at below -80???, easy to be removed from condenser chamber
  even under process of defrosting so next operation is promptly ready.
  PTFE coating is standard feature for protection from contamination
  corrosion by acid or chemical substance.

• More convenient
• Remote Access & Observation Window

• Connectable with PC by serial port. Available for monitoring temperature, vacuum level and operation status.
  Cloudiness of vacuum oil can be observed through the window for timely maintenance
  and for long term use.

• Easy control
• Micro processor LED control system

• ED display provides condenser temperature and vacuum level. Switches for Power On-Off,
  Selection of Automatic-Manual, Condenser cooling, Vacuum pump, Purge,
  Pre-freezing and concentration.

• All in one freeze-drying
• Multi drying chamber

• Freeze Drying is executed under various environments and observation for the process is necessary.
  New Multi Drying Chamber can be applied with various containers such as “Serum bottle, ampoule, complete flask,
  Petri dish and/or bulk tray”. Therefore various applications are possible and loading/unloading is convenient.
  It is easy to observe drying process and addition of freeze drying in the process is possible.

Being a quality oriented organization, we are engaged in providing a supreme quality range of Mild Steel Laboratory Freeze Dryers .